Description
If you’re running a street or track S550 and want better airflow, less weight, and a cleaner look than stock, the TruCarbon A72-RL Hood is a no-brainer. The factory hood doesn’t do much to manage heat, and it certainly doesn’t do your build any favors when it comes to front-end weight or aero. The A72-RL changes that with a lightweight, fully carbon construction and aggressive center heat extractor design that helps vent hot air out of the engine bay.
Unlike most stock panels, this hood actually supports performance—not just aesthetics. It clears most aftermarket intake manifolds and forced induction setups, while the rear-swept heat extractor helps drop underhood temps by letting hot air escape naturally. Pair that with the race-ready carbon fiber layup, and you’ve got a real functional upgrade that looks just as sharp as it performs.
This part’s available in our full 2015–2017 Mustang GT hood lineup, and if you’re building a full exterior package, check out our complete S550 body styling parts collection.
Key Features & Benefits
- Functional Center Heat Extractor | Helps pull hot air out from under the hood for better cooling during performance driving
- High-Gloss Carbon Fiber Skin | Real 3K twill weave carbon with UV protection and a show-ready finish
- Lightweight Construction | Significantly lighter than the factory steel/aluminum panel to reduce nose weight and improve balance
- Direct Bolt-On Fitment | Mounts with factory latch and hinges—no drilling or fab work needed
Technical Specifications
- Material: Hand-laid 3K carbon fiber with fiberglass-reinforced inner structure
- Weight Savings: ~25–30% lighter than stock
- Adjustability: Uses factory hinge and latch points—no adjustment beyond panel alignment
- Additional Required Components: Hood pins strongly recommended for high-speed builds; heat shield liner suggested
- Part Number: TC10026-A72-RL
Who This is For
This hood is ideal for 2015–2017 Mustang GT, EcoBoost, and V6 owners who need a combo of function and form. Whether you’re hitting the track, running boost, or just trying to keep things cooler under the hood, this one delivers. Especially good for cars with aftermarket manifolds, turbo kits, or anyone who wants to cut weight up front without compromising durability or fitment.
Fitment & Installation Notes
- Vehicle Compatibility:
- 2015–2017 Ford Mustang GT
- 2015–2017 Ford Mustang EcoBoost
- 2015–2017 Ford Mustang V6
- Compatible with all factory front-end configurations
- Direct Fitment or Requires Modifications:
- Direct bolt-on using stock hinges and latch
- May need slight panel alignment tweaks during install
- Installation Requirements:
- Reuses OEM hardware
- No electronics, wiring kits, or tuning required
- Heat liner strongly recommended to protect underside and finish
- Professional installation recommended for proper fit, hood pin setup, and clear coat protection
- Explicit Warnings:
- Does not include heat shield—recommended if running forced induction or aftermarket headers
- Not compatible with active hood latch systems—verify your model before purchasing
- Ships unpainted and unfinished—UV clear coat recommended if not painting
- Hood pins are highly recommended for track or high-speed use
Looking to match this hood with splitters or side skirts? Head over to our Mustang hood category or check out all 2015–2017 Mustang GT body styling parts for full exterior upgrade options.
Shipping & Damage Policy
NOTE: Shipping charges may vary based on factors such as destination, package size, and weight. While we strive to provide accurate shipping estimates during checkout, in some cases, actual shipping costs may exceed initial estimates.
If the shipping cost for your order exceeds the amount initially charged during checkout, our team will contact you to collect any additional fees.
IMPORTANT: TruCarbon packs all products carefully to prevent damage during shipping. However, damage may still occur occasionally. Please inspect the packaging and the products carefully upon receiving them, then accept the shipment and notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt in the driver’s presence. Buyer must retain all cartons, packing materials, and damaged products for the carrier’s damage inspector to inspect. Do not refuse shipment or return it without approval, because the buyer’s right to make a damage claim may be denied. A signed receipt without any notation indemnifies the carrier as well as TruCarbon from any further damage claims. Discovery of damages after a clear delivery becomes the responsibility of the customer.
All damages must be notified to carrier and the dealer within 24 hours. In cases of damage with proper notation on receipt, the carrier will determine whether to pay for repair cost or replacement value of the damaged goods after damage inspection. Replacement value is the amount the buyer paid to the distributor and is not negotiable. All disputes about the settlement amount should be addressed with the carrier. TruCarbon, under no circumstances, shall be liable for the damaged product or for subsequent settlement of the claim with the carrier.
Reviews
There are no reviews yet.