Anderson Composites Type-GT5 Double-Sided Carbon Fiber Hood – 2018–2019 Mustang GT

Description

The Anderson Composites Type-GT5 Double-Sided Carbon Fiber Hood takes the mild-mannered factory S550 look and replaces it with something worthy of a full-on street machine. The stock aluminum hood doesn’t give you much in terms of heat extraction or airflow—especially once you throw a blower, headers, or any power mods into the mix. The Type-GT5 solves that with functional center and side extractor vents while cutting serious front-end weight thanks to its double-sided carbon fiber construction.

Unlike single-layer or gel-coated fiberglass alternatives, this hood is finished top and bottom with a gloss carbon weave that looks killer at meets or with the hood popped in the staging lanes. With aggressive aero sculpting and a race-bred profile, it gives your Mustang a completely different presence—even while parked.

This piece is listed in our 2018 Mustang body styling parts section and pairs well with the rest of our Mustang hood upgrades.

Key Features & Benefits

• Aggressive GT5 Styling | Bold center hump and angular vents set this apart from any factory look
• Functional Heat Extractors | Center and side vents allow hot air to escape under throttle or at idle
• OEM Mounting Compatibility | Bolts directly to stock hinges and latch points for seamless install

Technical Specifications

• Material: Vacuum-infused carbon fiber with gloss clear coat
• Weight Savings: Substantially lighter than factory aluminum hood (exact savings vary by trim)
• Adjustability: Utilizes factory mounting points; slight alignment adjustment may be needed
• Additional Required Components: Hood pins recommended for safety
• Part Number: AC-HD18FDMU-GT5-DS

Who This is For

Perfect for 2018–2019 Mustang GT owners who want a mix of show car finish and street car function. If you’re dealing with high engine bay temps, building a boosted setup, or just want a more aggressive look up front, the GT5 hood checks every box. It’s ideal for street builds that need heat management and visual punch without going too wild.

For builds that already include splitters, diffusers, or wheels, this hood finishes off the front-end vibe. Want more? Dive into our full collection of 2018 Mustang body styling parts for other matching carbon or paint-ready panels.

Fitment & Installation Notes

• Vehicle Compatibility:
  • 2018–2019 Ford Mustang GT
  • Coupe and convertible fitment
  • Will not fit GT350, GT500, Mach 1, or EcoBoost models
• Direct Fitment or Requires Modifications:
  • Direct bolt-on to stock hinge and latch hardware
  • Some fine tuning of body lines may be needed
  • Hood pins required for added security, especially with vented airflow
• Installation Requirements:
  • Uses OEM mounting hardware
  • Requires aftermarket prop rod or hood struts compatible with carbon fiber
  • No tuning or wiring changes necessary
  • Professional installation strongly recommended due to carbon material tolerances
• Explicit Warnings:
  • Not compatible with factory hydraulic hood struts
  • Hood pins are required for safety—this is a lightweight composite panel
  • Not crash-rated—this hood is intended for performance/styling, not structural integrity

Looking for a hood that actually performs as good as it looks? The Type-GT5 is one of Anderson’s most aggressive S550 designs, with airflow, carbon fiber weight savings, and attitude baked into every angle. If you’re running a full aero kit or just starting your exterior build, browse the rest of our Mustang hood collection to find the perfect match.

Shipping & Damage Policy

IMPORTANT: Anderson Composites packs all products carefully to prevent damage during shipping. However, damage may still occur occasionally. Please inspect the packaging and the products carefully upon receiving them, then accept the shipment and notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt in the driver’s presence. Buyer must retain all cartons, packing materials, and damaged products for the carrier’s damage inspector to inspect. Do not refuse shipment or return it without approval, because the buyer’s right to make a damage claim may be denied. A signed receipt without any notation indemnifies the carrier as well as Anderson Composites from any further damage claims. Discovery of damages after a clear delivery becomes the responsibility of the customer.

All damages must be notified to carrier and the dealer within 24 hours. In cases of damage with proper notation on receipt, the carrier will determine whether to pay for repair cost or replacement value of the damaged goods after damage inspection. Replacement value is the amount the buyer paid to the distributor and is not negotiable. All disputes about the settlement amount should be addressed with the carrier. Anderson Composites, under no circumstances, shall be liable for the damaged product or for subsequent settlement of the claim with the carrier.