TruFiber 1999-2004 Mustang Fiberglass A70 Hood – V6/GT

Description

If your New Edge build needs something more aggressive than a subtle cowl or vent job, the TruFiber A70 Hood is the move. Designed with an angular, high-rise profile and wide dual extractor vents, this hood brings serious race-inspired looks and real-world performance benefits. It solves two major problems: lack of engine bay clearance for taller hardware and excessive under-hood heat buildup from boosted or high-output street cars.

Compared to the factory steel hood, the A70 cuts front-end weight, improves airflow, and adds visual attitude. It’s also paint-ready out of the box, thanks to its smooth white gel coat. Whether you’re building a track car or just flexing at weekend meets, this hood clears the hardware and makes a statement.

You’ll find this in our full catalog of 1999–2004 Mustang GT styling parts, and specifically in our range of aftermarket Mustang GT hoods.

Key Features & Benefits

• High-Angle Raised Center – Clears larger intake manifolds, throttle bodies, or blower setups
• Functional Dual Extractor Vents – Efficiently expels engine bay heat under load
• Race-Inspired Styling – Adds aggressive, custom flair that stands out from typical cowl hoods
• Lightweight Fiberglass Build – Reduces front-end weight for sharper turn-in and balance

Technical Specifications

• Material: Hand-laid fiberglass with white gel coat finish
• Weight Savings: ~20–25 lbs lighter than OEM steel hood
• Adjustability: Designed to use OEM latch and hinge points; hood pins strongly recommended
• Additional Required Components: Hood pins not included but advised
• Part Number: TF10024-A70

Who This is For

The A70 hood is built for 1999–2004 Mustang GT and V6 owners who are running tall intakes, big power, or just want the aggressive look without a Cobra swap. It’s ideal for track cars, forced induction builds, or even NA setups that run hot. If your stock hood is holding you back—visually or mechanically—this one clears the way.

Fitment & Installation Notes

• Vehicle Compatibility:
  • 1999–2004 Ford Mustang GT
  • 1999–2004 Ford Mustang V6
  • Note: Not compatible with 2003–2004 Cobra or Mach 1 bumper covers without modification
• Direct Fitment or Requires Modifications: Direct bolt-on using OEM hinges and latch
• Installation Requirements:
  • No electronic tuning or wiring changes needed
  • Pre-drilled for latch/hinge mounting
  • Requires primer, sanding, and paint
  • Hood pins recommended, especially for highway or track use
  • Professional installation recommended for fitment and paintwork
• Explicit Warnings:
  • Not compatible with shaker systems or Terminator hardware
  • Cobra bumper users may require custom fitting for line match
  • Requires finishing work before paint—gel coat is smooth but not final-finish

Looking to level up with something that offers real clearance and race-day style? Check out the full 1999–2004 Mustang GT styling catalog or browse our full collection of aftermarket Mustang GT hoods to match your setup.

Shipping & Damage Policy

NOTE: Shipping charges may vary based on factors such as destination, package size, and weight. While we strive to provide accurate shipping estimates during checkout, in some cases, actual shipping costs may exceed initial estimates.

If the shipping cost for your order exceeds the amount initially charged during checkout, our team will contact you to collect any additional fees.

IMPORTANT: TruCarbon packs all products carefully to prevent damage during shipping. However, damage may still occur occasionally. Please inspect the packaging and the products carefully upon receiving them, then accept the shipment and notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt in the driver’s presence. Buyer must retain all cartons, packing materials, and damaged products for the carrier’s damage inspector to inspect. Do not refuse shipment or return it without approval, because the buyer’s right to make a damage claim may be denied. A signed receipt without any notation indemnifies the carrier as well as TruCarbon from any further damage claims. Discovery of damages after a clear delivery becomes the responsibility of the customer.

All damages must be notified to carrier and the dealer within 24 hours. In cases of damage with proper notation on receipt, the carrier will determine whether to pay for repair cost or replacement value of the damaged goods after damage inspection. Replacement value is the amount the buyer paid to the distributor and is not negotiable. All disputes about the settlement amount should be addressed with the carrier. TruCarbon, under no circumstances, shall be liable for the damaged product or for subsequent settlement of the claim with the carrier.