Description
Description
The Spoiler Which Is Part Of The Car’S Aerodynamic Package Is Mainly Used To Reduce The Lift At The Rear Of The Vehicle, Thereby Improving The Car’S High-Speed Driving Stability.
Description
Type: Rear Trunk Spoiler Wing With 3Rd Brake Light
Material: Abs
Color: Matte Black
Place On Vehicle: Rear
Installation Method: Bolt-On
Installation Instructions: Not Included
Surface Finish:Unpainted
Package Includes: 1Pcs Rear Trunk Spoiler Wing With 3Rd Brake Light
Fitment
2003-2013 For Toyota Corolla
Bolt-On Spoilers That Require Drilling
1. Place Masking Tape On The Trunk Lid As A Position Guide.
2. Drill Holes At The Locations Indicated By The Strips.
3. Use A Small Fine File To Deburr The Newly Drilled Hole.
4. Recommended Primer, Up Paint, Or Silicone Sealant To Help Keep Them From Rusting And Water.
If Your Spoiler Has Built-In Brake Lights
1. Many Spoilers Feature A Built-In 3Rd Brake Light Which Illuminates In Sync With Your Vehicle’S Other Brake Lights.
2. Be Aware That During Installation, You May Need To Drill An Additional Hole To Accommodate The Brake Light Wire. (Some Spoilers Allow You To Route The Wire Through One Of The Mounting Holes.)
3. Once The Wire Is Routed Into The Trunk, Find The Existing Brake Wiring And Splice Into It To Complete The Installation.
Notes
1. Professional Installation Is Required, And The Rear Wing Needs To Be Installed At The Correct Angle.
2. Make Sure That The Boot Lid Is Clean During Installation, Heating With A Blower Will Make It Firmer.
Reviews
There are no reviews yet.