[2 Pack] Polyurethane Windshield Adhesive With Fast Curing Formula – High Bond Strength Window Sealant Compound – Easy Automotiv

Description

2 Pack Vavlue! Immediate Strength Development This Fast-Curing Automotive Window Glue Boasts Exceptional Bonding Power. One Application Of The Glass Adhesive Glue Is All It Takes For Permanent Weather-Resistant Protection. From Windshield And Glass Sealer To Rv Window Sealant, This Compound Can Do It All. Directions For Use: – Detach Wipers And Accents, Then Use A Utility Knife To Slice Through The Current Urethane Sealer – Remove Existing Glass With Care, And Carefully Clean Debris From All Surfaces – Align And Dry Set The New Glass Using Tape Strips For Positioning. Once Marked, Remove The Windshield – Remove The Majority Of The Old Car Glass Adhesive From The Pinch-Weld, Leaving Only A Small Layer – Apply Single-Step Primer* To Any Bare Metal And Conduct Any Required Abrasive Cleaning – Clean The Interior Surface Where Contact Will Be Made With Windshield And Glass Sealant – Apply A Thin Layer Of Primer* Around The Edge And Let Dry – Cut The Applicator Tip On The Windshield Leak Sealant To Desired Size – Directly Apply This Windshield Mount Adhesive Over The Old Auto Window Sealant – Position The Glass Using The Tape Markings, And Press Into Place To Complete Contact – Squeeze Out Extra Urethane Windshield Adhesive, Or Fill Voids If Necessary – Remove The Tape Alignment Strips, Reattach Moldings, Wipers, And Other Accents – Finally, Clean Up Any Excess Windshield Urethane Adhesive * To Use Without Primer, Ensure The Bonding Surface Is Free From Contamination Prior To Application Of The Car Windshield Sealant. The Glass Must Also Be Pre-Cleaned With A Non-Antistatic Glass Cleaner. Additional Instructions: Designed For Use At An Ambient Temperature Of 42-95 F. Place The Car Windshield Adhesive In A Plastic Bag And Submerge It In Hot Water Before Use For Best Results.